...
I cannot get to my miner's webpage by using
http://192.168.1.99 with the current IPV4 settings on "Obtain an IP Address Automatically".
I have to change my IPV4 settings to the below
Use the following IP address: 192.168.2.254
Subnet mask: 255.255.255.0
Default gateway: 192.168.2.1
Would you like me to change my IPV4 settings so that I can access my Network -> Diagnostics page to find out how many packets I have received?
Okay..this is getting a little bit confusing as you are not stating which IPV4 setting are for what.
If you PC's IPV4 address is 192.168.0.2 Subnet 255.255.255.0 then your miner has have an address between 192.168.0.1 and 192.168.0.254 to make it work. To set the miners address do the following
Change your PC's IP address to whatever you need to get to your miner's web page
On the Network -> Interfaces -> WAN page set the following
Protocol "Static address"
IPv4 address 192.168.0.131
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 192.168.0.255
Use custom DNS servers 8.8.8.8
Then hit the "Save & Apply" button.
The miner will save those changes and will seem to hang or timeout whilst it is making those changes, this what is meant to happen because it has changed the connection parameters and you can no longer connect to it.
Now change you PC IP address back to its previous setting so you can get to the internet correctly. Power off your Antminer wait 10 seconds then power it back on again and see if you can contact it at
http://192.168.0.131