all is good except this message :
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: input.bc: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'
and this other little prob ... No monitoring ...
[2019-03-13 18:22:31] GPU0 : 372 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:5]
[2019-03-13 18:22:31] GPU1 : 378 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:4]
[2019-03-13 18:22:31] GPU2 : 348 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:7]
[2019-03-13 18:22:31] GPU3 : 372 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:1]
[2019-03-13 18:22:31] Total: 1470 H/s
if someone can explan me ...
thx a lot
You can dismiss those messages, those are not affecting your mining speeds.
Regarding the monitoring, try this parameter :
"adl_type" : 1 or 2 , 1 - USE OVERDRIVEN , 2 - USE OVERDRIVE 5. Default is 1 if not set. Option 2 (Overdrive 5) is suitable for older cards
Try setting it to 2
Thx a lot for yor fast answer .
Ok for the warning message ...
I have try "adl_type" : 2 nothing .... i have try 1 it's same ...
{
"cryptonight_type" : "normalv4",
"intensity" : 0,
"double_threads" : true,
"off_temperature" : 90,
"adl_type" : 2,
}
if it helps, here are my gpu
GPU0: AMD Radeon(TM) R9 270 [pitcairn] [2048 MB][I: 24.0][W: 16][T: 2][F: 8][BUS: 5]
GPU1: AMD Radeon(TM) R9 270 [pitcairn] [2048 MB][I: 24.0][W: 16][T: 2][F: 8][BUS: 4]
GPU2: AMD Radeon(TM) R9 270 [pitcairn] [2048 MB][I: 24.0][W: 16][T: 2][F: 8][BUS: 7]
GPU3: AMD Radeon(TM) R9 270 [pitcairn] [2048 MB][I: 24.0][W: 16][T: 2][F: 8][BUS: 1]