This is the problem I keep having:
After reboot, display GPU or first GPU / GPU 0 will always crash after miner is started immediately as pool sends 1st job. Other GPU's are fine, but only the one connected to display, or GPU 0 has this issue and its reproducible on 2 identical rigs so I know its not a hardware issue. Then after I close the miner and start it second time, everything is fine.
Steps to reproduce:
- Reboot PC
- Start miner, wait till received job from pool, observe crash, hit H and GPU overclock is reset to default clock
- Close miner, restart miner, works fine after that
Using RX 470s, GRAFT algo.
Anyone else having similar issue? Dok is this something that could be fixed ?
Hi Dok - any idea why this would be happening?
Also I have 2 rigs with RX 470s, and on 1.8 GRAFT algo they're not stable for more than a day, crash and reboot on both. I reduced OC and increased voltage but still not stable for more than a day. Previously both rigs ran SRBMiner v1.6.8 and very stable for 30-40 days non stop - any ideas what would cause this instability on v1.8?
Thanks in advance!