My shipping box had a big hole in the side...Luckily there was no damage to the miner. All screws seem to be just fine, My front panel light doesn't work though.
There is a front panel light?
Well, according to the instructions a white light should come on if the unit is powered on...
Seems that some of the BJ's either had their LED/button connections not properly connected, or they came off in transit. The shipping companies seem to love beating the snot out of these!
It's not a big problem if you don't have a power LED as long as your box is running, but it's fairly easy to connect them. There is a 8 pin connector near the rear of the BJ, which is actually 4 two-pin connectors stacked right next to each other.
Looks like this:
::::The first one (left or rear most 2 pins) is the power LED, the next 2 are the activity LED, then the power button, and finally the reset switch. (Note the power button is not really used except for testing, as USB can remotely turn on/off your rig)
-Phil