Hello again guys...
I got me one of those GTX1050ti 4Gb cards, the one from MSI. Now I'm trying to figure out which algorithm to mine... Right from the start it mined at 21.000-19.000 Sols. According to my calculations I would be able to mine the same in 1 day as I've bin so far in 1 month. Quite a difference. Then I tried to select which algorithms to mine and then it went straight down to nothing again

But, now I should be able to mine running e.g. CGminer I guess. I'll be running my Linux systems and should the cards perform OK, I'll fill all 4 systems with 4 in each. I'm building a couple of raspberry pies, RACK mounted, mining using those USBminers.. Which is best do you think? And I don't think in used electricity, I'm producing my own power.
astraleureka, you install all of CUDA10 to mine???
Those GPUs are too old to mine any coin effectively. Even with free power you would be earning less than $1 per month. Also, why are you switching to a Cisco 18xx ISR for a router? They're very underpowered (an 1841 can barely do 20Mbps NAT throughput without maxing CPU).Which CISCO would you suggest? I've got Fixed IP, and 16 extra IP's for internet servers. I've got a modem so I need a CISCO with a WAN port, no built-in modems or anything. My line will be upgraded within a month, we've got the fast lines out here (the sticks) at last

Anyway one of you Linux Miners could help a fellow out ? Maybe making a little todo

I've been trying this for several months now, or maybe even a year now... It may just be due to the old cards, which I just didn't get was that old. Nevertheless, lesson learned...
Thanks,
KR
Dan