dear sir, can u share your ppt settings at win with cnr algo? I have some questions ①is it necessary to flash 56 to 64 bios? hynix memory can flash to 64?②what driver are u use?
my vega can not get below 863mv under my setting, stock bios, see the picture i upload, what should i do to lower it's power consume, thanks
I'm using linux, so my ppts are different from windows.
No, it's not necessary to flash your 56, and I wouldn't recommend it for cn/r. Some algos make better use of high bandwidth (high clocks), but cn/r is not really one of them - CN in general likes low latency, so the stock 56 bios is fine (and will save you some power.)
I'm guessing you're using 19.3.x drivers? If so, I'm betting your problem is that you have the stock 900mv set in your mem p2 state, which if that's the case, means regardless of your other settings, you will always run @ minimum 900mv (minus droop) unless you disable the state (for example, in overdriventool), or use a PPT which lowers the setting.