Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: [ANN] TeamRedMiner 0.4.3 - Cryptonight Thread - High hashrate, Low Power
by
kerney666
on 06/04/2019, 19:16:58 UTC
Quote from: seefatlow on April 06, 2019, 06:18:07 PM
Quote from: livada on April 06, 2019, 04:46:56 PM
Quote from: seefatlow on April 06, 2019, 04:13:12 PM

Livada,

I still have the same issue with the TRTL algo. My V64 cards aren't stable at 1100 Mhz or higher and my V56 cards aren't stable at 940Mhz memclk. None of my V64 or V56 modded cards can give >19 kh/s. Interestingly, only my V56 stock bios Samsung is able to achieve 19.3kH/s.

vega 56 with 64bios(samsung) and vega 64 have 19k+
only vega 56 hynixstock bios have 18,5k

I use 800mv PPT table for all card-

Problem with TRTL is specific.  Start work on 19500 and after 5-10-30min hr down to 18900 and after 5-10-30min go down to 18500.(veg56 samsung)
now i start with 19000hr and after 1 day hr is 19000. freq is identical but i not use L24+24 for vega 56 - i use L28+28 and hr is lower but stability.

veg64le - start 19500 and work. if i use lower GPU frq start normal 19500 but down after 10min to 19k. use higher gpu frq and high mv. i use 880mv for gpu and mem vega64LE

I too have the same hashrate instablity issues with Vega 56 bios mod and V64 cards. However stock V56 cards are stable at 18.7kh/s for Hynix and 19.3kh/s for Samsung

Hey guys! I have a 0.4.3.1 version with a few patches. Many times the lowered hashrate after a while is due to the threads coinciding, it’s a scheduling problem rather than a hw problem. Reach out to me on PM or find me on discord directly if we share a server. I’d love to get some feedback on the patches.