Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Hardware
Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup
by
alwaysthirsty
on 10/02/2014, 13:03:05 UTC
Quote from: dogie on February 10, 2014, 07:21:49 AM
Quote from: alwaysthirsty on February 09, 2014, 09:41:28 PM
Quote from: dogie on February 09, 2014, 06:26:28 PM
Quote from: alwaysthirsty on February 09, 2014, 06:22:14 PM
I need help guys, after hashinh for several days my cables at the molex splitters started melting.  Huh
See the OP again, the recommendations is NOT to use a molex connector. Plenty of links and information there.

It would power ONE. Remember you can use the 4 pin ATX mobo cable for one, and if you have am 8 pin you can power two with 2x4 pin.
Thank you for all the hard work and effort you have put in the OP. Do you think that, cutting a 6pin connector would be sufficient to power 3 blades, as a replacement for the molex?

Thank you for the reply. The quote got messed up for some reason. The 6pin connect has 3 blacks 3 yellow wires, they wont be able to handle intensity of 3 blades?