- Make sure your router's subnet is 1, ie 192.168.1.x
Hi all.
I can really use some help here:
I have this ASIC cube set up as per your instructions, and the darn thing will not hash above maybe 4gh/s unless I sit on the BE cubeminer screen and click on pools every few seconds (or when data stops streaming in)
This is my set up. I cannot use anything other than 0.0.0.0 as it's gateway as it is up on a business network)
..or am I doing something wrong.
Please help!
Take the port out of the IP, long pool should be active (which may be causing what you have).I can really use some help here:
I have this ASIC cube set up as per your instructions, and the darn thing will not hash above maybe 4gh/s unless I sit on the BE cubeminer screen and click on pools every few seconds (or when data stops streaming in)
This is my set up. I cannot use anything other than 0.0.0.0 as it's gateway as it is up on a business network)
..or am I doing something wrong.
Please help!
That's just it. Long pool sometimes is active and other times it isn't?
I'm stumped. Removal of the ports from the ip address did nothing. :/