Latest update... To purchase the S17, S17+, T17 firmware you will need a minimum of 100 miners currently. If you are interested in using my mod firmware on your farm contact me with your contact details and I will have someone from the sale or deployment team contact you.
S17plus oc/v firmware release v1 is now available Limited Sales - Minimum order is 2 license cost is 240 in btc or zec. This version may also become private so get yours while you can. Speeds of up to 85TH+ on as little as 3200watts
Antminer DR5 OC firmware now available
The Fusionsilicon X2 overclocking and voltage control firmware is now available. Offers freq and voltage control. Must be installed using SD card
Price is 30 per miner
The Chipless Antminer S9 K/SE Custom OC and Voltage Firmware is now Available starting at 35.00 per miner or qty discounts. Offers full Auto-Tune with freq and voltage Settings available in 3 modes. Global settings, Per Chain settings and Per Chain Per Chip settings. With 2 voltage choices for the freq options, Global or per chain.
Discord.... https://discord.gg/8cgtBcE
I now offer eepprom repair for corrupt hash board freq and voltage table caused by faulty firmware. Or if you dont want a full mod or just a boots i can give it to you. The service requires SSH access to the miner. Contact for details.
T17 modded firmware is ready. The current details are voltage and freq control. The price of the mod is $100 in zec or btc per miner. The speeds are as high as 60th+ with power varying from 2600-over 4000 watts depending on your settings. I don't want to hear about ROI etc because the firmware is for the life of the miner and the ROI can be fast or it can be spread out. If you are using dev fee and paying a percentage that could be going towards the equipment ROI then my firmware is for you. Put that 3% back in your pocket. Contact me for purchase info.
Features...
Per Chain and Per Chip Frequency Tuning
Ignores dead chips
safe for immersion will ignore 0 rpm fan errors
max temp shutdown control
Frequency control
Voltage Control
No DevFee license only
Fan Control
Sleep, Normal, Turbo Modes
975m @ 18.30v 3476watts
current now 56075.37
avg after 3 hrs 56295.01
Antminer B7 Full Frequency and Voltage Control is availableThe Antminer B7 mods are complete and is available for purchase. NO SSH or SD Card NEEDED!!!!!!
Super easy install no additional equipment or software needed.
The cost varies depending on the number of units you have. Starting at US $30 for 1 miner in a Coin we agree on when you pm for payment info. No PayPal. Digital Currency Only have over 6 miners pm for price quote.
It features full voltage and frequency control. Gained hash is from -100% to over +70% depending on the settings you choose. 693watts should give you around 150k +/- I have seen it peak over 600k and have ran it as high as 182k on a 24hr average
B7 Mod Prices$30 1 miners
$50 2 Miners
$80 3 miners
$110 4 miners
$140 5 miners
$160 6 miners
$180 7 miners
$200 8 miners
$225 9 miners
10 Miner Package $275
20 Miner Package $500
21 or more Contact Me
Comes complete with all the files and installs all files needed to use custom firmware on your Antminer B7.
Z11 Series Firmware....Now Available Z11 v2.4 Chipless Nitrous Private Supports ALL Z11 Series Miners ( Z11/Z11e/Z11j )
Nicehash Support - Reported Working Fine 8/14/2019
Support overclock and underclock
Supports Full voltage control from 262mv to over 1500mvv
Speeds as high as 161 k/sol @800m
Gain +4% in speed over factory speeds
Choose any voltage or any frequency you want
Manual or Auto Fan Control is Working
Auto-Tune completely removed
Port 6060 stuff removed
Use on as many miners as you want
Use on ANY SERVER you want NEVER a DEV FEE!!!
Download Link for 2.4 Private Free for Z11, Z11j and Z11e, Nicehash Supported full Fan Controlhttps://drive.google.com/file/d/1DRm0ZPsKuDJ7NQB-3LEgLUd591QLcvpv/view?usp=sharingDownload Link for 1.8.r Private free for Z11 Series Miners NO Nicehash Support, Full Fan Controlhttps://drive.google.com/file/d/1tQDcH2ai5EdDJ1AyWmorifWz6get_f66/view?usp=sharingAntminer S9kUnlocked SD image. Unlocks SSH and Disables Signature Checking. Nothing more was done to the image. To be applied using a SD card.
https://drive.google.com/file/d/1EievYtO1mpnX8IHd8LyPYS9PLmtvygRm/view?usp=sharingContact me on discord user Chiplesshttps://discord.gg/6t62apJIf this firmware helped you please make a donationZcash --- t1RRUy9teEVx3JYy63fHHXiTNBnqb9FJ6zP
BTC--- 3JRKnuhtvC9oqW2rDDWq6EwQBES9SPWKsd
I WILL ANSWER PM's AS FAST I CAN
SD card files updated on 8/10/2019 This Sd card image version 2.4 of the Nitro Public.1 Unpack files from zip to a sd card from 2gb-32gb in size.
2 Power down miner and place sd card in sd slot on miner
3 power miner back on and wait until you see the led's flash or wait about 2 minutes
4 power miner down and remove the sd card
5 Power miner back on and SSH is enabled and no signature checking for future updates thru the web gui.
6 Your miner is now ready to load any newer custom firmware and controllable via ssh
Antminer Z11 SD Recovery Nitro Public v2.4https://drive.google.com/file/d/1tlTqDx1mCtpQpyhpHbU5UO3pG21Y36GY/view?usp=sharingIf you find this firmware helped you please make a donation
Zcash --- t1RRUy9teEVx3JYy63fHHXiTNBnqb9FJ6zP
BTC--- 3JRKnuhtvC9oqW2rDDWq6EwQBES9SPWKsd