Re: GekkoScience NewPac Stickminer Official Support Thread
Hey 
I just finished my optimized air flux box for my gekko newpac Work only for the gekkoscience USB HUB (the best...)
For a best cooling i removed the top HUB cache.
Due to my printer size bed i needed to cut the box to 8 parts, you need to glue them, but it work
Here is the stl files if you want.... You need two 9 cm classic PC fans, the up fan let
in the fresh air, and the second fan get out the hot...
I just finished my optimized air flux box for my gekko newpac
Work only for the gekkoscience USB HUB (the best...)For a best cooling i removed the top HUB cache.
Due to my printer size bed i needed to cut the box to 8 parts, you need to glue them, but it work
Here is the stl files if you want.... You need two 9 cm classic PC fans, the up fan let
in the fresh air, and the second fan get out the hot...
Filax,
How much would you charge to make a box like yours? Can you tell me what program you are using to do the print job and the steps i need to follow? I have access to a 3d printer at work but have never used it?
Thank you in advance.
-Josh Gage