Hi guys,
Thank you for your many good tips. Here comes the update from todays afternoon:
- Trotec fan aimed at open container
- Mobile air conditioner aimed at open container
- the two Whatsminers D1 started
-> Both ran with stable 45-50 TH / s, the three hashboards with 70-75 degrees in normal range
-> Temperature in cold zone container at about 25 degrees, stable
-> Exhaust pipe feels warm (not hot like yesterday before the shutdown)
Photos:
https://s16.directupload.net/images/190425/d6stg3x3.jpghttps://s16.directupload.net/images/190425/qhbozz97.jpghttps://s16.directupload.net/images/190425/znczmwn4.jpghttps://s16.directupload.net/images/190425/a28f7qn8.jpghttps://s16.directupload.net/images/190425/t94gugoa.jpgVideo:
http://sendvid.com/brulmqiwAt 8 pm I switched on the Antminer DR5:
- Due to lower outdoor temperatures outside the hall, the temperature in the cold zone of the container has also dropped to 23 degrees, and even 17 degrees at the entrance to the hall (there is no more direct sunlight on the east side)
- Hashrate at stable 35 Gh / s, PCB temperatures between 66-71 degrees, chips at max. 80 degrees
Tomorrow I will continue to measure temperatures during the day, and possibly switch on the Dayun Zig Z1 +. Let's see what happens then.
I also think about the recommendations for stronger fans, as well as the tips with the cables (the topic was totally new to me).
In any case, you all a huge thank you for the great help and the many good advice. You are really great! Tomorrow there will be new information ;-)
Good night
Vinncent
