Re: AMD Mem Tweak - Read/modify mem timings on the fly - [Vega Friendly] [Win/Linux]
vega 56-hynix
i use this setup
--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600
work 10-12 hour with 2-3 error and block all comp and dont go tu restart:(
what i must chage? what step i must use?
etc: rp14 to rp15
rfc 156 chg to rfc 157 ? or i must use 168 or higher?
what step use ? 1? or nubmer /with 8 or 16?
--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600 - work but i must little downclock this, but i dont know how and what...
i try down mem 1100 to 1090mhz but again have error
i try give more power. now work with 870mv and i try with 920mv but again have error
pls any tutotrial what formula work with rp rc rfc ref etc....
i use this setup
--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600
work 10-12 hour with 2-3 error and block all comp and dont go tu restart:(
what i must chage? what step i must use?
etc: rp14 to rp15
rfc 156 chg to rfc 157 ? or i must use 168 or higher?
what step use ? 1? or nubmer /with 8 or 16?
--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600 - work but i must little downclock this, but i dont know how and what...
i try down mem 1100 to 1090mhz but again have error
i try give more power. now work with 870mv and i try with 920mv but again have error
pls any tutotrial what formula work with rp rc rfc ref etc....
read back a little for formulas
if your hynix memclk is really 1100 then and it's stable at stock timings, then rfc and rc and rcdwr are too low imho.
i read all page but not see any forumula..(i go read again)
my mistake- 1100 for samsung. 1 samsung card always have error 1100 or 1090 .
Ram timings in nutshell
thx.
i read this but this is to high for me.
i need tutorial for noob not for expert.
like if use 1+ CL you must chg RP +12 etc.
just some basics- my mem timinig work and i must chg little down . i have only 2-3 error in 12 hour
--rp 14 --rc 42 --rfc 156 --rrds 4 --rrdl 5 --rrd 3 --rcdrd 18 --rcdwr 3 --REF 15600
what fisrst try chg? RP? REF? with
step . 1?Try higher rfc. I run 208 and 260 on my vegas and add --ras 46 maybe