my timings are stable up to 1090mhz hbm clock. Yours feel fine with 1107 but I didn't test for long.
Mine are 2350h/s cn-r (teamred) vs yours 2200h/s (teamred) with 1090mhz clock. Claymore's is 49.5 vs 48 mhs eth.
With higher mem clock (1107mhz) with your timings results are getting better but didn't catch mine at 1090mhz.
Thanks for the stock values.
That is a huge difference in CN/R and it shouldn't be, im wondering what settings did you get for 'my' timings. Can you share them ?
here what I see on vega64lc with srbminer 1.8.6 and profile 10
I used timing = 0 (auto) option from drivers with srbminer.
When I applied custom timings shown above I used timing = 1 driver mode.
Don't know if it makes any difference