as i wrote before the gpuinfo prints the same results before and after algo_specific _oc
Does it show nvidia-settings applying OC values after miner restart on gnome-terminal?
Please set OVERCLOCK_MODE to " NO", "GLOBAL" and "ALGO_SPECIFIC" with different values.
Restart NVOC after editing 1bash with:
bash ~/NVOC/mining/nvOC restart
Check if gnome-terminal shows nvidia-settings applying OC values or not
Run report command after every nvOC restart and post results.
bash ~/NVOC/mining/nvOC report
Report generator for nvOC v0019-3.2 v0012
Operating System info:
Kernel : 4.4.0-138-generic
OS : Ubuntu 16.04.5 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10)
nvidia driver : 410.78
nvOC info:
nvOC path : /home/m1/NVOC/mining
nvOC : 0019-3.2
Report : 0012
1bash : 0058
1bash.template: 0058
3main : 0028
5watchdog : 0024
6tempcontrol : 0012
wtm switch : 0023
wtm profit : 0004
pool switch : 0002
minerinfo : 0013
Hardware info:
Motherboard : ASRock H110 Pro BTC+
BIOS ver. : P1.10 06/20/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3735200 kB
Mem Free : 1130092 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V (rev 31)
CUDA SDK version
nvcc path : /usr/local/cuda/bin/nvcc
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2018 NVIDIA Corporation
Built on Tue_Jun_12_23:07:04_CDT_2018
Cuda compilation tools, release 9.2, V9.2.148
nvoc.service systemd's log
● nvoc.service - nvOC Service
Loaded: loaded (/etc/systemd/system/nvoc.service; enabled; vendor preset: enabled)
Active: inactive (dead)
HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 14.3G disk 1 1 usb SanDisk Ultra Fit 1.00
├─sda1 9M vfat part 1 1 /media/m1/12D3-A869
└─sda2 14.3G ext4 part 1 1 /
VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1c02 (rev a1)
Local git branch and submodules status:
## release...origin/release
M 3main
+8baabf41eacfbcb5d0e3aa8db0e94289c91e516a miners (heads/3.2-miners)
## HEAD (no branch)
1bash settings:
1bash version .............: 0058
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 20
GPU Utilization Threshold .: 70
Alternate Pool ............: NO
Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 60
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 38
MAXIMAL_FAN_SPEED .........: 90
CLEAR_LOGS_ON_BOOT ........: NO
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 30
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO
POWERLIMIT MODE ...........: GLOBAL
Power Limit WATTS .........: 110
OVERCLOCK MODE ............: GLOBAL
Memory Overclock ..........: 1000
Core Overclock ............: 100
GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: nv074
plusCPU ...................: NO
AUTO_SWITCH ...............: WTM_SWITCHING
WTM_AUTO_SWITCH_COINS .....: AION;BTCZ;BTG;NICE_LYRA2REV3;NICE_X16R;RVN;XMN;ZEL
WTM_AUTO_SWITCH_URL .......: https://whattomine.com/coins.json?utf8=✓&adapt_q_
COIN ......................: ZEL
ALGO ......................: ZHASH
MINER .....................: GMINER
ZEL WORKER ................: nv074
ZEL ADDRESS ...............: t1VPYLF9...
ZEL POOL ..................: zel-eu.coinblockers.com
ZEL PORT ..................: 4446
ID | PS | T° | FAN | LOAD | POWER / LIMIT / MAX | GPUCLOCK | MEMCLOCK | VENDOR - MODEL
0 | P2 | 63 | 37 | 100 | 91 / 110 / 110 | 1556 | 3802 | ZOTAC - GeForce GTX 1070
1 | P2 | 64 | 41 | 100 | 111 / 110 / 110 | 1531 | 3802 | ZOTAC - GeForce GTX 1070
2 | P2 | 62 | 43 | 100 | 105 / 110 / 110 | 1506 | 3802 | GIGABYTE - GeForce GTX 1070
3 | P2 | 58 | 36 | 100 | 106 / 110 / 110 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070
4 | P2 | 63 | 43 | 100 | 110 / 110 / 110 | 1518 | 3802 | GIGABYTE - GeForce GTX 1070
5 | P2 | 60 | 39 | 100 | 112 / 110 / 110 | 1544 | 3802 | GIGABYTE - GeForce GTX 1070
6 | P2 | 59 | 36 | 100 | 111 / 110 / 110 | 1531 | 3802 | GIGABYTE - GeForce GTX 1070
7 | P2 | 67 | 49 | 100 | 107 / 110 / 110 | 1885 | 3802 | GIGABYTE - GeForce GTX 1060 3GB
---------------------
the problem remains...
Thats for OVERCLOCK_MODE=GLOBAL please post for OVERCLOCK_MODE=NO and OVERCLOCK_MODE=ALGO_SPECIFIC too
Does it show nvidia-settings applying OC values after miner restart on gnome-terminal or not?