Post
Topic
Board Hardware
Re: GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread
by
House Xylander
on 03/05/2019, 03:55:00 UTC
Thank you VH, on top of it as always I see.

I take it from what I have read so far that I will no longer need to run the 4 hours restart with this new build.

Nicely done VH,

Tried running it with this:

Code:
/cgminer -o stratum+tcp://bch.viabtc.com:3333 -u Xylander.gekko1 -p x --suggest-diff 1280 --gekko-newpac-detect --gekko-newpac-freq 500

And after 15-20 seconds it would crash with this error:

Code:
 0: GSH 10031523: BM1387:02+ 200.00MHz T:500 P:139 (24/171/94)   |  72.9% WU:^7
  1: GSH 10030254: BM1387:02+ 200.00MHz T:500 P:155 (24/171/94)   |  80.8% WU:^7
  2: GSH 10031531: BM1387:02+ 206.25MHz T:500 P:190 (23/169/91)   |  93.2% WU:^9
  3: GSH 10030194: BM1387:02+ 206.25MHz T:500 P:186 (23/170/91)   |  92.8% WU:^9
  4: GSH 10031522: BM1387:02+ 200.00MHz T:500 P:56  (24/171/94)   |   6.4% WU:^
  5: GSH 10031521: BM1387:02+ 200.00MHz T:500 P:170 (24/171/94)   |  86.3% WU:^8
  6: GSH 10030160: BM1387:02+ 200.00MHz T:500 P:151 (24/172/94)   |  76.7% WU:^7
  7: GSH 10030253: BM1387:02+ 200.00MHz T:500 P:149 (24/171/94)   |  75.7% WU:^7
  8: GSH 10030032: BM1387:02+ 200.00MHz T:500 P:53  (24/172/94)   |   6.5% WU:^
  9: GSH 10030237: BM1387:02+ 200.00MHz T:500 P:82  (24/171/94)   |  10.0% WU:^1
 10: GSH 10030030: BM1387:02+ 200.00MHz T:500 P:161 (24/171/94)   |  83.6% WU:^8
 11: GSH 10030174: BM1387:02+ 200.00MHz T:500 P:42  (24/171/94)   |   4.8% WU:^
5% | 2.207G / 2.145Gh/s WU: 30.0/m----------------------------------------------
 [2019-05-02 23:20:12.454] Accepted 0b959214 Diff 5.66K/4096 GSH 6
 [2019-05-02 23:20:21.071] Accepted 16089615 Diff 2.97K/1280 GSH 10*** buffer overflow detected*** buffer overflow detected ***: ./cgminer ***: ./cgminer terminated
     terminated
               *** buffer overflow detected ***: ./cgminer terminated
                                                                     Aborted (core dumped)