Hey I am having Major trouble connecting to my cube. It powers on fine, all lights power on, the network light even blinks. but even after pressing the reset button and setting my subnet to 192.169.1.x i can't connect to it. advanced ip scanner shows no new devices. when i tried yesterday it showed a device @ 192.168.1.255 after resetting but i couldn't get any web interface on any port, it just timed out.
My network works with two routers and a switch due to a weird network config in my student housing so do you guys think it would be possible to connect it with a crosscable to my pc to try and connect to the interface or something like that.
The cube should reset to 192.168.1.254:8000 after resetting it right??? it doesn't seem to do that.
I tried everything in the guides I even turned off my android wifi devices.
I have checked the physical integrity of the cube, everything is dandy.
Got any ideas or suggestions?
Thanks!
Probably just a typo - but I notice in one place you're talking about 169 as the third octet in your IP setup, and in another your're talking about 168 (which would be the correct one).
192.168.xxx.255 is generally a broadcast address, not a device.
A crossover cable between your pc and the cube is a good idea, as long as the IP address on the pc is set to 192.168.1.xxx (something other than 254).
'snail