1GHz baby!

I accidentally managed to turn on all 8 VRMs on my old 8VRM Jupiter.
Since they were all on and we can control the voltage with the tuning firmware I decided to try some more overclocking.

When running these with all VRMs on they have a base voltage of about 0.9V, so it had to be lowered in the advanced tuning page to get a reasonable voltage. -0.5V works fine.

Currents and temperatures are reasonable.

Total power consumption on the inside of the VRMs is 850W. I guess that will be 950-1000W at the wall. Since my PSU is only 1050W I do not dare to go higher.

The November units will be crazy once you get the tuning FW!