Re: Official FutureBit Apollo LTC Image and Support thread
One of my PCI-E connector on Apollo get burned using Balanced mode on default settings.
Any suggestions?
Any suggestions?
First that looks like a cheap low gauge PCIE splitter, second did you have two separate PCIE from wires from your PSU plugged into both plugs on the Apollo?
Looks like you only had one plugged in, which is a no-no for anything other than ECO mode.
You should always have both plugs from your PSU plugged into the Apollo regardless to be safe, thats why they are there.
Wow, such a waste. Great power supply, very high efficiency, great miner Apollo there, all wasted by cheap 6pin to 6pin cables or even Y splitters... Never cheap out on this.
Your Apollo will still work I presume, you have another PCI-e female port to use in ECO mode, or you can plug them both, but be aware that one pin is probably not conductive anymore so you cannot ever use turbo mode, unless you fix it/solder it back.