Re: AMD Mem Tweak - Read/modify mem timings on the fly - [Vega Friendly] [Win/Linux]
New Release
Link: Here
Will upload CLI versions asap as well!
I noticed some people have figured out that there is still room to improve on RX 4**/5** cards.
Just not many people saying how..
Well, open up the tool, and raise Refresh Rate (REF) i created a separate textbox for it to make it easy.
Raise it from 5 to 7/8 (just an example) and you'll see improvement already.
Slightly dropping RFC will increase your hashrate as well.
Greetings
- Added FIJI support
- Added Refresh Rate timing (RX boost
) - Overdrive fixes
- Added memory manufacturer detection for G5, HBM & HBM2
- .....
Link: Here
Will upload CLI versions asap as well!
I noticed some people have figured out that there is still room to improve on RX 4**/5** cards.
Just not many people saying how..
Well, open up the tool, and raise Refresh Rate (REF) i created a separate textbox for it to make it easy.
Raise it from 5 to 7/8 (just an example) and you'll see improvement already.
Slightly dropping RFC will increase your hashrate as well.
Greetings
Thank you Eliovp for the info. I only tried raising the REF from 5 to 9 and got a 1.178 increase from my MSI Rx580 G8 Hynix and a 0.739 increase from my XFX RX580 G8 Samsung memory. I'll play with the RFC after I now the 2 card types are stable. Update: I raised my REF to 10 for the last 12 hours and has been stable. Original 27.803 to 29.313, a 5.43% increase and Original 24.852 to 25.854, 4.03% increase. Thanks again Eliovp for the info! RFC is next for both cards after another 12 hours.