guys i have 16 rigs running and i saw that one rig was very low temp (which is very good with hot weathers coming)
so i was looking in Awesome Miner (i use AM to monitor) and saw this miner was running 1450 core and 935 mem the mem had 0.9volt
my other miners have 1.2volt which is why the temp is high i guess... so i taught maybe i have different ODNT setting but it's the same on all my machines
after a reboot volt went to 1.2 and temps 10c up... why is this happening is my ODNT not working.. if i look on miner it pushes the 1450 and 935 i set..
this is my ODNT startup settings:

GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1138;950;0
GPU_P3=1269;1000;0
GPU_P4=1312;1050;0
GPU_P5=1474;1100;0
GPU_P6=1474;850;0
GPU_P7=1450;850
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=700;900;0
Mem_P3=935;900
Fan_Min=3000
Fan_Max=4900
Fan_Target=50
Fan_Acoustic=2400
Power_Temp=80
Power_Target=0

i use Windows 10 latest build with 18.6.1 drivers.. i assume my miners ignore the 900mV but pushing 1.2Volts?


FIXED UPDATED TO 2.7 OVERDRIVENTOOL