Re: [ANN] Technobit HEX8A1 - 6/8 chip Coincraft A1 board -999 EUR March delivery
OMG guys the fans are worse than I thought! MARTO! 
BOTTOM FANS = Sunon PF92251V1-000U-G99/S99 = 92mm 12V 4.7W 4500RPM 46dBA 75CFM
TOP FAN = Sunon PMD1209PMB1-A(2).GN = 92mm 12V 12.5W 4900RPM 57.6dBA 120.2CFM
The thing is HUGE! Here it is next to a Hex16B!
I don't have time to mess with it today because it's valentines day and a couple of family birthdays too!
All the parts I need have arrived except the PSUs I had on back order.
I'll have to go hunting for a PSU tomorrow, can anyone confirm 850mV it runs < 264W?
I might just pick up a cheap 550W 44A to tide me over. It's using 17.2W just for fans!
On a serious note guys these fans are dangerous to little fingers. Keeps kids away/get fan guards. They only cost a few dollars.
BOTTOM FANS = Sunon PF92251V1-000U-G99/S99 = 92mm 12V 4.7W 4500RPM 46dBA 75CFM
TOP FAN = Sunon PMD1209PMB1-A(2).GN = 92mm 12V 12.5W 4900RPM 57.6dBA 120.2CFM
The thing is HUGE! Here it is next to a Hex16B!
I don't have time to mess with it today because it's valentines day and a couple of family birthdays too!
All the parts I need have arrived except the PSUs I had on back order.
I'll have to go hunting for a PSU tomorrow, can anyone confirm 850mV it runs < 264W?
I might just pick up a cheap 550W 44A to tide me over. It's using 17.2W just for fans!
On a serious note guys these fans are dangerous to little fingers. Keeps kids away/get fan guards. They only cost a few dollars.
I am currently running one board with a PSU where I use 2 rails 22A each, stable for 20 hours now with 980mV.