Post
Topic
Board Mining support
Re: repair a T9 + after a bad firmware (lost chain)
by
Ortadan
on 06/07/2019, 20:45:34 UTC
Hello, I recently bought a damaged T9+ to replace (Fan, controller card) my other antminer and the 3 hasboard present this error:

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000315] ps7-ttc #0 at df804000, irq=43
[    0.000625] Console: colour dummy device 80x30
[    0.000657] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040211] pid_max: default: 32768 minimum: 301
[    0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042631] CPU: Testing write buffer coherency: ok
[    0.042978] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043040] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043264] L310 cache controller enabled
[    0.043284] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121039] CPU1: Booted secondary processor
[    0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210361] Brought up 2 CPUs
[    0.210381] SMP: Total of 2 processors activated.
[    0.210389] CPU: All CPU(s) started in SVC mode.
[    0.211087] devtmpfs: initialized
[    0.213505] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214759] regulator-dummy: no parameters
[    0.223745] NET: Registered protocol family 16
[    0.226061] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228373] cpuidle: using governor ladder
[    0.228386] cpuidle: using governor menu
[    0.235924] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237477] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237598] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259526] bio: create slab at 0
[    0.262232] vgaarb: loaded
[    0.262971] SCSI subsystem initialized
[    0.263864] usbcore: registered new interface driver usbfs
[    0.264037] usbcore: registered new interface driver hub
[    0.264265] usbcore: registered new device driver usb
[    0.264788] media: Linux media interface: v0.10
[    0.264956] Linux video capture interface: v2.00
[    0.265197] pps_core: LinuxPPS API ver. 1 registered
[    0.265209] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.265336] PTP clock support registered
[    0.265691] EDAC MC: Ver: 3.0.0
[    0.266747] Advanced Linux Sound Architecture Driver Initialized.
[    0.269708] DMA-API: preallocated 4096 debug entries
[    0.269724] DMA-API: debugging enabled by kernel config
[    0.269819] Switched to clocksource arm_global_timer
[    0.289887] NET: Registered protocol family 2
[    0.290585] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.290644] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.290729] TCP: Hash tables configured (established 4096 bind 4096)
[    0.290781] TCP: reno registered
[    0.290799] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.290832] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291082] NET: Registered protocol family 1
[    0.291466] RPC: Registered named UNIX socket transport module.
[    0.291480] RPC: Registered udp transport module.
[    0.291488] RPC: Registered tcp transport module.
[    0.291497] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.291510] PCI: CLS 0 bytes, default 64
[    0.291988] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294075] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296233] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.296420] msgmni has been set to 967
[    0.297226] io scheduler noop registered
[    0.297239] io scheduler deadline registered
[    0.297282] io scheduler cfq registered (default)
[    0.308907] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.308927] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.437366] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.005772] console [ttyPS0] enabled
[    1.010119] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.017740] [drm] Initialized drm 1.1.0 20060810
[    1.034801] brd: module loaded
[    1.044282] loop: module loaded
[    1.053993] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.059743] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.067728] libphy: XEMACPS mii bus: probed
[    1.072295] ------------- phy_id = 0x3625e62
[    1.077045] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.085976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.092801] ehci-pci: EHCI PCI platform driver
[    1.100057] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.106863] usbcore: registered new interface driver usb-storage
[    1.113778] mousedev: PS/2 mouse device common for all mice
[    1.119908] i2c /dev entries driver
[    1.126866] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.132397] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.138299] Xilinx Zynq CpuIdle Driver started
[    1.143215] sdhci: Secure Digital Host Controller Interface driver
[    1.149311] sdhci: Copyright(c) Pierre Ossman
[    1.153678] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.160542] mmc0: no vqmmc regulator found
[    1.164558] mmc0: no vmmc regulator found
[    1.209863] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.218554] usbcore: registered new interface driver usbhid
[    1.224057] usbhid: USB HID core driver
[    1.228793] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.235090] nand: Micron MT29F2G08ABAEAWP
[    1.239058] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.245002] Bad block table found at page 131008, version 0x01
[    1.251226] Bad block table found at page 130944, version 0x01
[    1.257278] 3 ofpart partitions found on MTD device pl353-nand
[    1.263057] Creating 3 MTD partitions on "pl353-nand":
[    1.268148] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.276248] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.283570] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.292565] TCP: cubic registered
[    1.295800] NET: Registered protocol family 17
[    1.300531] Registering SWP/SWPB emulation handler
[    1.306452] regulator-dummy: disabling
[    1.310853] UBI: attaching mtd1 to ubi0
[    1.838616] UBI: scanning is finished
[    1.850401] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.857456] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.864259] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.870921] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.877765] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.883772] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.890894] UBI: max/mean erase counter: 126/62, WL threshold: 4096, image sequence number: 248547359
[    1.900086] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.909289] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.909295] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.913327] ALSA device list:
[    1.913331]   No soundcards found.
[    1.929720] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.996221] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.002174] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.011279] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.021169] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.026197] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D5E65D66-FDFF-460C-B3DB-A1F2DEB908D8, small LPT model
[    2.037739] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.045178] devtmpfs: mounted
[    2.048289] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.892395] random: dd urandom read with 0 bits of entropy available
[    3.289840]
[    3.289840] bcm54xx_config_init
[    3.899866]
[    3.899866] bcm54xx_config_init
[    7.900703] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.906793] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   24.777082] In axi fpga driver!
[   24.780183] request_mem_region OK!
[   24.783547] AXI fpga dev virtual address is 0xdf9fc000
[   24.788652] *base_vir_addr = 0xc510
[   24.804571] In fpga mem driver!
[   24.807646] request_mem_region OK!
[   24.811259] fpga mem virtual address is 0xe2000000
[   25.619250]
[   25.619250] bcm54xx_config_init
[   26.249199]
[   26.249199] bcm54xx_config_init
[   30.249679] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   30.255702] xemacps e000b000.ps7-ethernet: link up (100/FULL)
Detect 512MB control board of XILINX
Miner Type = T9+
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
chain[1] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
chain[2] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[J2] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!

Chain[J3] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!

Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Fix freq=675 custom_voltage_value=890 custom_voltage_enabled=1 disable_fan_check=0 fixed_frequency=1
Fix freq=675 Chain[1] voltage_pic=7 value=890
 voltage_config=7792714
Fix freq=675 Chain[2] voltage_pic=7 value=890
 voltage_config=7792714
Fix freq=675 Chain[3] voltage_pic=7 value=890
 voltage_config=7792714
Fix freq=675 Chain[8] voltage_pic=7 value=890
 voltage_config=7792714
Fix freq=675 Chain[9] voltage_pic=7 value=890
 voltage_config=7792714
Fix freq=675 Chain[10] voltage_pic=7 value=890
 voltage_config=7792714
Fix freq=675 Chain[11] voltage_pic=7 value=890
 voltage_config=7792714
Fix freq=675 Chain[12] voltage_pic=7 value=890
 voltage_config=7792714
Fix freq=675 Chain[13] voltage_pic=7 value=890
 voltage_config=7792714
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J2] has 0 asic
Chain[J3] has 0 asic
Chain[J4] has 0 asic
Chain[J9] has 0 asic
Chain[J10] has 0 asic
Chain[J11] has 0 asic
Chain[J12] has 0 asic
Chain[J13] has 0 asic
Chain[J14] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s

Miner fix freq ...
max freq = 100
set baud=16
restartNum = 2 , auto-reinit enabled...
setStartTimePoint total_tv_start_sys=343 total_tv_end_sys=344
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

would it be possible to repair the hashboards following the steps of this post by means of a pickit3? if possible I would buy this one: https://www.amazon.com/gp/product/B011BBQQEK. Would that do?

Thank you!