Post
Topic
Board Hardware
Re: GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread
by
WilcoWi
on 08/07/2019, 04:29:13 UTC
Is it the version that VH has listed on the first page of this thread? If it is then it will autotune upto the freq you set in the bat file.

EDIT:

If you set at 600 then it will find the best freq UPTO that point. But your sticks may well have a max freq LESS than that, at which point it will not be 600.

true: got 6 newpac's atm,
3x 600 Mhz
1x 563 Mhz
2x 463 Mhz

Als start with 600 as target, after a while they are adapted to max performance when u use vh's version

Oh, and don't forget to cool when going over 100 Mhz !

If by 7th port you mean port 1, diagram on back states 2A for ports D & 1, so depends on the amps you pull on the D port plus newpack @600 Mhz (Yikes!)

Mine pull 0.81A @200

https://i.imgur.com/b0QpYlO.jpg

well i am running @ 600 Mhz as target, not all sticks stick to that.

Can't see backside, i am using the hub. Another hub is on its way, so i'll look @ it when it arrives. (google can't provide me with picture of backside).