Unfortunately, it didn't work, connecting to minergate.
Even connecting successfully with other pool, after this error:
Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel for kernel 0 for DeviceID 0 (Thread 0)
it starts to crash everywhere, the application, the system, you name it... I tried several cleans setup, with all type of configs but without success.
Probably some incompatibility with these drivers version.
Recommended driver : Adrenalin 18.6.1
Algorithm : Cryptonight V4 (CN/R)
Algo switching : disabled
Coin forking : disabled
Gpu watchdog : enabled [normal mode]
Startup monitor : enabled
Tweaking : enabled
[2019-07-08 20:03:13] Pools defined -> 1
[2019-07-08 20:03:13] Loading [normalv4] kernel for DEVICE BUS_ID[3]
[2019-07-08 20:03:13] Loading [normalv4] kernel for DEVICE BUS_ID[3]
[2019-07-08 20:03:13] ADL initialised successfully
[2019-07-08 20:03:14] Connected to pool.supportxmr.com:7777
[2019-07-08 20:03:14] Pool difficulty: 40000
[2019-07-08 20:03:14] Job received, block height 1874147 [ID: VRMnppD/yKP9aKoGxuekVnYwxsZh]
[2019-07-08 20:03:14] Precompiling program [BUS_ID: 3]
[2019-07-08 20:03:19] Finished program precompilation [BUS_ID: 3]
[2019-07-08 20:03:22] Error CL_MEM_OBJECT_ALLOCATION_FAILURE when calling clEnqueueNDRangeKernel for kernel 0 for DeviceID 0 (Thread 0)
Is there someone that is mining successfully with Windows 10 and a Radeon VII?
This problem comes from your virtual memory options in windows
Radeon VII is a 16gb card so you need to set at least 16 GB of virtual memory in windows settings.
Right Click on This PC > Properties > in the left, select Advanced system settings > a window pop ups , in the advanced tab and Performance section select settings> go to advanced tab > change memory virtual settings > select Custom and type 16384 (16*1024) in the initial size (min) and something more in the max size , for example 17000, remember that its 16 gb for each card, if you have two cards you should type 32768 for min, and after that click on set ( don't forget this if you don't click on set button it will get back to the previous numbers) and then ok.
you are ready! lets start the SRB!