Finally the Vegas are on SMOS (Vega version)...
Any suggestions on how to further optimize watts and hash?
8 x Vega64 / 300MHs / 37.xxMHs per card
I can push memory higher to 1100 to achieve 44Mhs per card
but I am worried about overall watts consumed by this rig
currently just under 1300watts.
The Vegas have Samsung memory.
PSU is 2400w Delta.
I haven't experiment with eliovp's auto-mem utility and rxboost.
*** eliovp, tytanick - if you guys are reading this post, please advise.
.
.
.
Any suggestions on how to further optimize watts and hash?
8 x Vega64 / 300MHs / 37.xxMHs per card
I can push memory higher to 1100 to achieve 44Mhs per card
but I am worried about overall watts consumed by this rig
currently just under 1300watts.
The Vegas have Samsung memory.
PSU is 2400w Delta.
I haven't experiment with eliovp's auto-mem utility and rxboost.
*** eliovp, tytanick - if you guys are reading this post, please advise.
.
.
.
Curious how the power delivery works for this mobo.
Is it just 8x 6pin input from PSU, then 8x 6pin output from mobo, which goes into a splitter and then into the Vegas?
This board is quite simple, just like what you described above.
The splitter is quite safe since total watts less per splitter is way less than 300w - as per SMOS and the clock settings, max watts per card around 130watts per Vega64.
Surprisingly quite cooling this setup, since this Gen1 Vegas are reference blower type.
I got these boards from Letine.
I was able to get the rig to push 338mhs at Nicehash@DaggerHashimoto, using PhoenixMiner and recommended amdmemorytweak utility inserted in the advanced tool settings on the SMOS dashboard. Great help from the SMOS Discord channel.
BogdanCo settings is even better but my rig couldn't handle it, so I had to settle for 42-43mhs per Vega
