Re: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

Quote from: se2ingu on July 17, 2019, 05:50:07 PM

@jaxl

Default is 192.168.1.100

@bigcoin8

I am having issues as well. You ever get a new firmware flashed?

Quote from: bigcoin8 on July 11, 2019, 08:05:11 PM

......hmmm I tried to put away the 6pins while PSU plugged in after the 3rd card it started! juhuuuuuu Cheesy

atfer that I put the 6pins again.....and wowww I came to into the Miner Webinterface Menu and could cofig the Pools etc.

Hurraaaaaaa it is working Embarrassed

.... BUT

the bad things are: a) only half of Units (Cards) are working ..... Unit 2 - 5 are on and have together about 5,40 MH/s

b) it doesent reboot when needed,......I have to do the procdere (plugging of the cables) again!

hmmm does update from v,2019.06.24 to v.2019.07.05 help?

There would be also a hotfix on download page of zigminer.com

https://drive.google.com/drive/folders/1RlYpFPwiR5JJlMqe8c3k1_c1_BknpwMN
how can it do that hotfix ? Udisk bin ...i dont have a stick port on Zig Z1 pro

or should i load the Udisk image and update over Webinterface ?

Yes I made an update.. I made the hotfix_07_05... but i didn't see any changes!
Better was that I checked the contacts... some data cable were not really fixed, I guess...!

At the end 7 of the 8 Units are working and iam quite happy... when it's running it's runs!
in average 10040 MH/S ( nicehash shows) also in my minermenue!
only 0.01 - 0.02 Error Percentage

still one other issue: when I stop the miner.. I have to plug of 1 or 2 units from PSU, after that and only then it's starting!
who has the same issue? and what could be tbe reason?
to much power of PSU?

I tried to reduce Starting Frequenz from. 700 to 650 MHz or 600 MHz
then I need only to plug of one Unit!

What could be wrong....?

i would have guarantee for 6 months.
but sending back to China... not profitable I guess.. hmmmm