Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.9.2 - native algo switching
by
just4u
on 21/07/2019, 13:13:15 UTC
Quote from: livada on July 21, 2019, 10:49:20 AM
Quote from: Topcd on July 21, 2019, 10:46:21 AM
Quote from: just4u on July 21, 2019, 05:18:01 AM
It's been awhile since I've used SRB Miner.  Mining XMR  using 2x Strix Vega 56s with Hynix Memory (and latest drivers as I don't only mine with the system) Can't really go above tweak profile 2 without artifices, same goes if I raise mem clocks to high (930+)  Is there anything else I can try based on the information I am giving here?  I think it's fairly ok.. not sure what else I can do. Thanks for any advice.

GPU0 :    1780 H/s [T: 55c, RPM: 1998, CC: 1307 MHz, MC: 900 MHz][BUS:29]
GPU1 :    1796 H/s [T: 65c, RPM: 2446, CC: 1307 MHz, MC: 900 MHz][BUS:32]
Watts around 160 per card (GPUZ)


I recommend you to flash Vega 64 bios on your Vega 56s, so you will be able to get at least 1900 h/s per card in normal condition.
hynix not good with 64 bios. Just use
 TRM and you have 2100 with hynix or 2350Hr with samsung vega 56

I never really thought about flashing these cards (had them over a year now..) reports were it was "iffy" on Asus Strix cards that don't use Samsung mem.   I tend to switch between Xmrig, Stak, SRB, if mining xmr.. plus dok has low fees and works on his a lot.