Post
Topic
Board Hardware
Re: HashFast BabyJet users thread
by
-ck
on 17/02/2014, 08:26:25 UTC
Well my pi stoped reading it then the pi didn't connect to the internet at all but have been using with windows the past 3 days still have never hit 400 with mine at all highest I have been was 387 with the pi. Now with windows got running pretty good but at 370 and when overclocked to 630 and now only getting 380 with cg 3.11.0 I use only because 3.12.3 has too many resets with cgwatcher. But still never hit 400 and now I got to buy another pi tomorrow to see if minepeon would boost it up, and im talking about the stats on eligius. Wont even bother contacting hashfast because of course they rushed us our products when they were already a few months late and will not do anything because its past 10 days of having there shitty product.

My RPi worked fine until February 7th. I had it running on WiFi and was getting 420GH/s. Since then, it only reads the SD card once in a while. HashFast sent me a new SD card and the RPi rebooted when MinePeon registered on my network. Now, the RPi runs 5 to 10 minutes and reboots, if it reads the SD card, and when it reboots, it can't see the SD card.

My BabyJet still gets 420 GH/s running on Ubuntu with BFGminer. If there is an easy way to install cgminer on Ubuntu, I haven't found it... When it comes to apt-get, github, etc. I am a total newbie...

If you're on a modern ubuntu, I provide binaries for it already.

wget http://ck.kolivas.org/apps/cgminer/cgminer-3.12.3-x86_64-built.tar.bz2
tar xf cgminer-3.12.3-x86_64-built.tar.bz2
cd cgminer-3.12.3-x86_64
sudo cp 01-cgminer.rules /etc/udev/rules.d/
./cgminer [commands]
plug in device via usb