One minor miner issue: The first one I set up was working fine, but as I restarted the 3 units on the same PSU, that first one didn't have the amber LED at startup. Then I set up wifi, and restarted them again. It took a while for the green/red to start blinking. Now that unit has no front LED indication at all. Tried putting it back on wired ethernet, as well as reflashed the SD card for grins, but no change. Otherwise, it appears to be humming along just fine.
Q: Is there a connector that may have come loose, or could this be a harbinger of things to come for the board?
Thanks!
Just throwing this back out there since we're on a new page. Wondering if it is worth opening up.
Thats weird, you could try lifting the controller board a bit out of its socket and re-set it in there and make sure its seated in there well.
If its still not working just shoot me a PM, could just be a bad LED module that need to be replaced.