I received the PSU the other day and went to check on it after a few days of being used. The PSU is warm which is normal but the cable from PSU to the miner is warm too. i would say just 1/4 of length from PSU to miner is warm. I'm not sure if the cable is supposed to be warm?
When i had my other PSU plugged in the cable wasn't warm. So just want to double check on this.
Thats fine, that's just residual heat from the PCB being dumped back into the copper cables. You only have to worry if the black housing on the 6 Pin connector or the cables near it is super hot...this means some sort of bad electrical connection, and you should shutdown, unplug, and replug the connector and make sure its firmly in there.