Re: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching
Hi Guys!
I've been working on the constellation MiningRig Vega64 for the past 2 years - water cooled and fe cooled mix.
With the following settings and setup:
SRB Miner 1.9.3.
Windows 10 (1803)
Adrenaline Driver 18.6.1
ASUS B250 Mining Expert
2x Enermax Platimax 1700W ATX 2.4
8x Vega64 - WATER cooled // 4x Vega64 FE
Today I spent the whole day testing my rig again and again and again, and was able to reach the following values:
Highest daily value: 2346 H/s
https://drive.google.com/file/d/1uYAECE4AHwyW87EuXRnN7DFuBFH4PWBO/view?usp=sharing
Settings CONFIG:
{"id": 0, "intensity": 124, "worksize": 16, "threads": 2, "tweak_profile": 10},
{"id": 1, "intensity": 124, "worksize": 16, "threads": 2, "tweak_profile": 10},
POWERTABLE settings:
https://drive.google.com/file/d/1E13BCCLTxWO6yf4sGDfVG93XAiw-HRE7/view?usp=sharing
Download LINK:
https://drive.google.com/file/d/1UDGf8JcuKY4mFrSiFdrcWeYd24Gh2rtT/view?usp=sharing
(IMPORTANT: Then adjust the values in the OverdrivnTool for P7 and P3 to: 1435Mhz // 966mV and 1100Mhz // 923mV
I have now searched for a strong and stable attitude and personally changed something. I have also tried to reduce power consumption a little, but it comes with P7 (mV) from 950 crash of the system. So 966mV I think is the safest and option, with P3 (mV) 923 is very close, as I have a lot of experience with P3 (MhZ) of 1100, where they have set in the old PowerTables between 905mv and 915mv, that often crashed the system.
Maybe those are not the best values, but I'm pretty happy.
I am always happy to work on it and reach new heights in mining with my Vega`s. 
I worked for a long time with the TABLE // P7 - 1408/915 and P3 - 1100/905, but unfortunately I had to realize that these are no longer stable or I could not find a stable version and I tried a lot.
I hope I could possibly help, you can always send me a message.
Best regards
Patrick
I've been working on the constellation MiningRig Vega64 for the past 2 years - water cooled and fe cooled mix.
With the following settings and setup:
SRB Miner 1.9.3.
Windows 10 (1803)
Adrenaline Driver 18.6.1
ASUS B250 Mining Expert
2x Enermax Platimax 1700W ATX 2.4
8x Vega64 - WATER cooled // 4x Vega64 FE
Today I spent the whole day testing my rig again and again and again, and was able to reach the following values:
Highest daily value: 2346 H/s
https://drive.google.com/file/d/1uYAECE4AHwyW87EuXRnN7DFuBFH4PWBO/view?usp=sharing
Settings CONFIG:
{"id": 0, "intensity": 124, "worksize": 16, "threads": 2, "tweak_profile": 10},
{"id": 1, "intensity": 124, "worksize": 16, "threads": 2, "tweak_profile": 10},
POWERTABLE settings:
https://drive.google.com/file/d/1E13BCCLTxWO6yf4sGDfVG93XAiw-HRE7/view?usp=sharing
Download LINK:
https://drive.google.com/file/d/1UDGf8JcuKY4mFrSiFdrcWeYd24Gh2rtT/view?usp=sharing
(IMPORTANT: Then adjust the values in the OverdrivnTool for P7 and P3 to: 1435Mhz // 966mV and 1100Mhz // 923mV
I have now searched for a strong and stable attitude and personally changed something. I have also tried to reduce power consumption a little, but it comes with P7 (mV) from 950 crash of the system. So 966mV I think is the safest and option, with P3 (mV) 923 is very close, as I have a lot of experience with P3 (MhZ) of 1100, where they have set in the old PowerTables between 905mv and 915mv, that often crashed the system.
Maybe those are not the best values, but I'm pretty happy.
I am always happy to work on it and reach new heights in mining with my Vega`s. I worked for a long time with the TABLE // P7 - 1408/915 and P3 - 1100/905, but unfortunately I had to realize that these are no longer stable or I could not find a stable version and I tried a lot.
I hope I could possibly help, you can always send me a message.
Best regards
Patrick