I decided to upgrade the miner with the last version first without changing the drivers. And all the problems started
every night at about the same time all rigs stop sending to the pool but they continue to draw full power from the wall .
I tried to set --minrigspeed but the miner works at full power just not submitting to the pool so the string does not work for me /pool is
https://bittube.miner.rocks/Then I changed the drivers with 18.5.1 but without luck - the problem stays. It works for most of the day but then stops submitting to the pool and continues to draw full power from the wall /and not 140w like with 1.7.3/
Current setup is
SRB Miner 1.9.3
Afterburner 4.5.0
AMD Driver 18.5.1
Screenshot
https://pasteboard.co/IrsHrzW.pngThere is nothing that would restart the rig on a lot of compute errors (compute error = gpu and cpu got a different result for the same nonce), so --minrigspeed can't do anything here.
Your cards are hashing and working on new jobs , but they get all results wrong, that's why nothing is sent to the pool.
Are you guys using the tweaking profiles?
That could produce this kind of issue.
If you do, it would be nice to run the miner without it and see if this issue still exists. (use the
--disabletweaking parameter).
The strange thing is that I have 4 rigs and they start almost at the same time at night around 6.30 AM - like something triggers them at this time /they are not in the same room and different power supply/electric phase - I have 3 phase electricity option and put rigs at different to distribute the load /.
I made little test - returned 3 of the rigs to 1.7.3 and they are working from 2 days but the 4th is with 1.9.3 and 18.5.1 and today again at 6.45 AM started to give errors
You say that no matter
when you start the miner, on 4 rigs it will start spitting incorrect shares at the same time ? (6.30am).
I don't know any reason for this, there is no built in timer or something that would trigger this.
Could you please do this on the rig with v1.9.3 :
- remove video driver with DDU (very important to use DDU)
- install 18.6.1
- disable tweaking with --disabletweaking parameter
Can you upload a log from miner start somewhere and send me the link in PM, so i can inspect it ?
Also config file if you use it, or start parameters.
Thanks
