Guys anyone knows how to set the DPM on HiveOS for r9 290/390 GPUs? I have overclocked the cards from bios but the OS doesn't pick the highest GPU frequency. I tried with the wolfamdctrl command but it says: Specified core state does not exist. Is it ok to modify again the bios with the same frequency on all states and the same voltage to bypass the bug from the HiveOS? or the card will get damaged?
If the Hawaii is similiar to the Tahiti's then the reason why you aren't getting the highest GPU frequency is because the DPM states need to go from the lowest to highest in frequency. They need to be in order like 300Mhz,500Mhz,800Mhz, 947Mhz, 1000Mhz, 1050Mhz, etc. You can't do something like 300Mhz, 500Mhz, 800Mhz, 1000Mhz, 1050Mhz, 947Mhz, because you will run into issues that way.
What software are you using to modify your BIOS?
I remember with the Hawaii GPUs, I didn't have issues with the clockrates but I had issues with the fan speeds. I could never get them to automatically set but had to manually set the fan speeds because modifying the bios didn't do anything.