yea worked, after mashing ctrl f5 couple times
Its a nice firmware with solid features, but don't expect much regarding performance. Latest Bitmain firmware does better regarding Ths/W (or at least mine S9 couldn't do better on this firmware)
@Patrik
I noticed that after reverting back to latest Bitmain firmware the consumption got higher on ELPM. Previously for S9 ELPM was 9.5Ths/760W now i get 9.5Ths/860W (this performance was also on vnish when mimicking ELPM). Can you check with developers of vnish what could possible be the reason for this?
Thanks for the feedback. Please note that before version 6.8.3 of Awesome Miner, the Mining Profile selection if made via Awesome Miner wasn't always correctly applied. If you use the latest Awesome Miner version or select the Mining Profile directly from the Antminer web interface it should work better.
The feedback I've received from other users is that they get to 14.7TH/s - 15.5TH/s on their S9 miners. In your case I assume your are looking for the lowest possible power usage and it might be that there are less room for improvements in that end.
When you use the Update firmware feature in Awesome Miner, it will do "Keep settings" as it's called in the web interface. Have you made a full reset of the settings when you are on the Bitmain firmware to make sure all custom properties in bmminer.conf are removed? Once your bmminer.conf is default the Bitmain firmware should perform exactly like before.