Beastly are you able to dual mine, and is it stable now? Also could you tell use how much power just one cell is using mining only scrypt. I dont have a controller and I posted earlier in the thread that when connected to my PC one unit is drawing 45 watts while only mining scrypt. Do you know if this issue has been addressed in the update. Also I was under the impression that the new software had to be loaded on each unit, not the controller? Thanks in advanced for the info.
You can't load new firmware on the consumer units (notice the absence of the white switch we have on the dev units) you can only update the controller firmware. The current firmware I have only used for scrypt but will try dualmining when I get home. I understand it works but didn't look into it. The current software it will work but not show you the output you need to look at your pool. The devices draw 7 watts in scrypt mode by to cpuminer on the computer doesn't have the ability to turn off the power to the sha cores that is why you are experiencing the high power usage. I don't think the controller has that issue.