Try
ckpool (no register needed) and see if its working there. And tell us what pool it doesn't work with.
I've tried, i connect to ckpool.org but my problem is not the pool destination, i've tried with slushpool,zpool and multipool, sometimes connect....
Now i've copy braiins with dd into tf card, insert into the s9, copy into the nand ( my control board is xilix )
I set passwd, hostname and pool (only one, the ckpool " depool.ckpool.org:3333 " without stratum+tcp:// )
i start and work......
i power off and power on and work.
another time power off and power on and don't connect
if another time power off and power on and don't connect
if another time power off and power on and don't connect
says:
API connection status: CGMiner is trying to start but keeps restarting, maybe wrong configuration?
Last cgminer quit reason: No servers could be used! Exiting. (0:11:17, clear reason)
this's my cgminer.conf (who don't start)
{"bitmain-use-vil":true,"api-port":"4028","api-allow":"W:0\/0","bitmain-voltage":",,,,,","config-format-revision":"1","bitmain-freq":",,,,,","no-pre-heat":true,"api-listen":true,"multi-version":"4","pools":[{"_id":"1","url":"depool.ckpool.org:3333","pass":"x","user":"1NjwuT6NaWmQb7aMPGcYPQj97sQTz4nkA7"}]}
i've tried also with the 443 port but nothing change.
i've tried also add at the pool address the prefix "stratum+tcp://" but nothing.
How can i fix? i don't understand where's my problem...... help.....
Hi, i think i solved the problem.
i must be put the "Use custom DNS servers"
now working......
but IPv4 broadcast must be fill or not? i'm not fill..... i don't know what write.....