Hello guys,
I am experiencing an issue.
I made a new rig with 6 Phantom Gaming D Radeon RX570 8G OC, the memory installed on the cards is Hynix.
They are not bios mod since I wanted to use -strap command directly in Claymore's miner.
I am using Claymore v14.7 miner, with driver 19.4.3 since it is with this driver that Claymore has most tests been performed.
Compute mode ON, with overclocking, I uninstalled and installed the driver in claymore to be able to use -strap command.
And I am mining at 22.5 MHs no matter what -strap I am using.
The strap is applied successfuly : "strap "POL8H1" is applied successfully" on each card.
but the hashrate just refuses to change ! (-rxboost does actually work and allow me to reach 24MHs)
Anyone can help me to get -strap working on my rig and to reach 30+ Mhs per card, maybe by also changing the OC settings?
I will give to the one who provides me with a solution 100$ worth of Ethereum Classic.
try other modes of strap 1-6 and rxboost 50 for example
I tried all -strap (from 1 to 6) they all applied successfully but no changes.
Rxboost is not an issue (I tried all -rxboost from 1 to 100) they all work fine.
My question is how to get -strap working properly?
I mean I dont need to bios mod the cards if -strap works fine because it will apply the new timing memory on the fly in Windows.