Re: [ANN][POOL] Profit switching pool

What if I have 4 different rigs, totalling 2.7Mhs, but one has 400MH, the other 700MH, etc, all pointing to the same BTC address? Should I just leave "x" in this case?

Overall you're better off setting a hardcoded difficulty. Lowers the work on the server overall, and if/when you disconnect, you don't start back from the default difficulty and ramp up. I'd personally use 64 for the 400MH, 128 for the 700MH, and 256 for anyhting around 1MH (512 above 1.5ish?). Theres no right answer, they'll all work fine, just a bit differently (more/less variance, more/less network connectivity, etc)

Do you mean 400KH and 700KH?

Pool: When talking about the KH and the MH, are you referring to the overall miner total or each individual card? I am running a total of four cards on one rig totaling ~1.8MH. After reading your post, I set my diff to 256. In your opinion, is that a good setup for me? For the past week or so (since I have been on your pool) I kept it as X and let your servers decide for me. Thanks, and keep up the good work....last two payouts have been good.

EDIT: After running the 256 for about and hour or so...I have noticed two things. 1)I get quite a bit of work restarts. 2)I get quite a bit of detected new block. This appears to lead me to my concern....cgminer is reporting what appears to be a lot less accepted work since the change. I am at about .5% reject rate on 1.8MH/s. Is this normal, or is there currently an issue on your side? ...OK just looked again and now ive got like 10 straight accepts...it seems to come and go in spirts. Is this normal? Thx.