Did anyone try ETC in ethermine, it looks like it doesn't read "-"(dash) and . (dot) in the pool link in the config. In the console shows connected as its pointed in the config but actually it doesnt read the subdomain. I'm using 4.5c with smos. eu1-etc.ethermine.org:4444. I was waiting about 2 hours the rigs to appear, meantime everything was looking fine, then i decided to check the etc address in the eth pool and yes, it was there.
It works fine with eu1-etc.ethermine.org:4444 or any other ethermine ETC pool (both when specified in the command-line or config.txt with -pool and when specified in the epools.tt). Please check your configuration and your log file - most probably the first pool is left to ETH ethermine from before you change to ETC. In the log file you will see how many pools are read from the command-line or config.txt and how many from epools.txt. You can also see the list of all pools by pressing the 'e' key when in miner console.
Thank You thats all I need to know, I'm using SMOS as I mentioned above, so maybe I need to edit smos on each rig. Thats my config line in smos: -pool eu1-etc.ethermine.org:4444 -wal 0xwalletaddress.001 -rmode 2 In the console miner says it is connected to eu1-etc.ethermine.org but the shares actually came from the its eth pool.
EDIT for the records PhoenixMiner 4.5c works better than Claymore 14.7