Hi, miniZ
I see a lot of chatter about OC settings. (OC1 and OC2) Where do I put that setting. In my bat file? Kinda slow here, I'm thinking I'm missing something. Then a bunch of red percentages after a couple of minutes!
6gb MSI 1060s ~20 Sols pwr 75% 100 and 200 clocks
MSI 1080 ~35 Sols 75% 100 and 200 clocks
Running Win10 Driver version 430
Thanks for all the help!
Hi BigHarryArmsi,
the oc1 may get you a performance improvement, but this depends on your settings. It is good to try it and check which is best for your configuration.
You can add to the command line --oc1, or in your case bat file:
:loop
.\miniZ.exe --url=ssl://1442d0fab48a6d76dee30643ff01d9b7e83790df46f6b7e69a72e891c028202f.1060s@beam.sunpool.top:3334 --oc1
timeout /t 5
goto loop
Regarding the red percentages, it seems that you had a few invalid shares and likely in the beginning. Did the red percentage turned green? Or at least is the percentage converging to 100?
This can happen, but it should be sporadic. Do let us know if it happens often.
Cheers