Thanks for the note.
Yes, I am disappointed at the hash rates especially when I see others with 60s for their 1080TIs!
My 1060s are running a little better after some hours ~21, 1080 ~42 Power at 65% and 79% respectively and all clocks at 140 and 400. It seems to make little difference with my OC setting but power makes a noticeable difference. Drivers are all 430+
1080TIs are running ~56 (Blecch!) at 80% and clocks at 140-400 again. (still experimenting there) Power is a big deal, here. Drivers are 419+
Both rigs running on Win10 with G3930 CPUs. CPU use is way down from 144_5! Thanks a bundle for that! OC1 serious decreases, OC2 slightly slower so running with neither at this point.
Any suggestions to get these speeded up are greatly appreciated! Anyone?
Thanks again for all the help.
Hi BigHarryArmsi,
how is it going with the OCs?
Based on some values that people have been sharing around we realize that PL~70% (give or take 5%) is the most common power used by miners.
We tried some values for clocks core and memory for the 1080 that we share here for your (and others) reference.
1080: PL=70% (126W), core=+150, memory=+900 resulted in ~40.7 Sol/s. T~65C, Fan~42%.
Tomorrow we plan an update to beta version, could you try then the 1060 6GB and check if there was any improvement?
Thanks!
Cheers