1) hold the reset button for a full 6 seconds before releasing.
2) It will now be at 192.168.1.99 (or 192.168.2.99)
3) Assuming your router is 192.168.1.1 - static IP
ipv4 address: 192.168.1.99
ipv4 netmask: 255.255.255.0
gateway: 192.168.1.1
Broadcast : LEAVE THIS BLANK
custom dns server: 8.8.8.8
Disable DHCP
4) if it still wont work, what are your pool details and post some screenshots
I tried holding the reset button for twice that long and then shutting it down, leaving it off for a while, then starting it back up. Then when I tried to set my IP to 192.168.1.99 or 192.168.2.99 and connect to it but it's not there. I doubt the router is 192.168.1.1-- This is a university network so everything is 130.160.XXX.XXX instead of 192.168 and I have no ability to administrate a router or anything like that. Are those settings in step 3 supposed to be for my computer or the miner?