Re: [MinerStats Lite] - FREE Antminer ASICs Monitoring

For those who wants to test our software here is a brief instruction below.

To start working with MSLite on Windows or Linux, you should download the archive visiting a page with demo version of the software
located at the following address: https://lite.minerstats.ru and press the button «DOWNLOAD NOW!».
It can also be downloaded from the direct link located here: https://minerstats.ru/lite/MSLite-latest.zip.

Once you downloaded and unpacked the archive you should select and open the corresponding file for your OS.

https://minerstats.ru/lite/msl_109/screen_1.png

The window will open and you will have to enter the address for launching the software.
You can use localhost:80 by default and then statistics will be available only on your currently used device.

https://minerstats.ru/lite/msl_109/screen_2.png

Or you can enter your IP address in the following format: IP of your computer:80 (ex: 192.168.1.10:80).
Then everyone in your network will be able to see statistics after connecting to the software.

https://minerstats.ru/lite/msl_109/screen_3.png

Pressing enter, you will get the current configuration of IP addresses and the address used to launch the software.
Next, copy the link and enter it to the browser.

https://minerstats.ru/lite/msl_109/screen_4.png

Once you entered the address in browser, enter the login and password.
Default login and password are admin/admin. Later you can change authorization data in settings.

Then you will be redirected to the page used to configure IP addresses.
To complete the initial setup, you should enter IP addresses of your ASICs as a list or range and save these data.
After that, software will collect all the data about devices you use.

https://minerstats.ru/lite/msl_109/screen_5.png

So, software is now all set and ready to work with.
More information about interface and other basic settings you will be able to get by the link https://wiki.minerstats.ru

______________

MSLite Team