:O damn man nice, i was JUST saying in an earlier thread i needed a modern miner for my r9's i was firing back up
then you release this, couldn't be better timing.
Gonna test this tonight, nice to see something by a known dev
Have some merit on me
then you release this, couldn't be better timing.
Gonna test this tonight, nice to see something by a known dev
Have some merit on me
Sorry i will have to dissapoint you, but i added support for those blindly, i don't own anything older than rx, so please share the results with me too
oh ok, ya so far ive had no luck with rainforestv2 on my 290's, but i have alot of testing yet to do, i should really just retire these things to a scrapyard probably
590's are like less than 200$ usd now :O seems like a good price
What does no luck means ?
Maybe i can help. Is it working (hashing), or you get some errors, or.. ?
Something is not good with your miner...mining rfv2 with 480/580/570 and miner show dead gpu on some card,i change the clock,voltage,and nothing so i quit i lost 2h for nothing
I got it running for 10 days on 7 rigs, same cards 4/8gb .. that is about 40 gpu's.. did you try anything else beside leaving the default auto config (intensity 0) ?
If you use straps and settings for ethereum, you should give it a little more voltage. Mem clock is not really important so it can be lowered.
It's the easiest to say the problem is in the miner..
If is not the miner what it is? i use your miner before on cryptonight and it was ok..i have 3 rigs and the same problems...i don't know what to use and i put on 0 auto..what do you recommend on this cards to stay stable and not crash the gpu(post your clock,voltage.memclock)
? trust me i try hi voltage and the same rezoult gpu die(gpu clock 1150-1000)....so i don't remember to have that much issuse running miners like this one Auto setup sets 2 threads / gpu, so try 1 thread instead.
For 470/570 try :
intensity 27
worksize 64
threads 1
for 480/580 :
intensity 27
worksize 128
threads 1
Also try to play with intensity, not all gpu's can handle the same settings/overclocking settings.
ok,thx but you don't post the gpu-clock.mem-clock,voltage'...u know better this thing is your miner