Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
S4VV4S
on 20/02/2014, 21:10:30 UTC
Help, after I setup the
IP: 192.168.2.254, Gateway:192.168.2.1, DNS:blank/or 192.168.2.1
The IE couldn't find the AntMiner by http://192.168.2.100 (on Miner).
And the Network Connection is always [Cable disconnected].

Your Antminer should be 192.168.1.100 unless you changed it.
(Actually all latest Ants ship with 192.168.1.99)

So your Ip should be 192.168.1.254, gateway 192.168.1.1
subnet 255.255.255.0

EDIT: Use Advanced IP Scanner to find the actual IPs on your network.

I followed both set up of 192.168.1.xx/192.168.2.xx, nothing happened.
Is it possible the network card coming with S1 is bad?
I have 2 light & 1 small green light blinking.
Power Supply is Corsair CX600.

The card is fine.

Use this tool: http://www.advanced-ip-scanner.com/
and scan your network for all available IP addresses then you will know what your Ants IP is.