hey guys, thank you for taking the time, I am running ubuntu 18.04 on a gygabite Z170-HD3 DDR3, cpu is a intel core i3-6100 3,7GHz, OS is on a ssd
psu is a corsair CS550M, nothing connected to the mobo, it's a remote machine, just the ethernet cable, the r606 and the gekko hub
only thing I had to leave connected is the hdmi cable plugged into the mobo and the screen (monitor has no power whatsoever) because for some reason without I couldn't share its screen (all black)
for the gekko I tried different usb ports, 2.0 and 3.0, shared and not, even without the terminus, same thing, the r606 seem to not mind which port is running onto
I tried the newpacs one by one and singularly they all run great, also in pairs, trouble starts when I run a new instance for one of the other two (one or both)
I also tried to connect them all to the gekko hub and run them one at the time using their serial numbers (--gekko-serial), they all are fine until I start the third and/or forth, doesn't matter which one
anyway I can test the bus / traffic lanes of the motherboard not being able to keep up as you suggested ?
here is the pc:
https://www.gigabyte.com/Motherboard/GA-Z170-HD3-DDR3-rev-10#ovhttps://ark.intel.com/content/www/us/en/ark/products/90729/intel-core-i3-6100-processor-3m-cache-3-70-ghz.htmlhttps://www.corsair.com/us/en/Categories/Products/Power-Supply-Units/cs-series-config/p/CP-9020076-NA