Still not working as of last night, but Ill give it another try tonight. Image writes fine but device isnt picking it up. Assigns a new IP after scanning but showing as inactive and cant get the device to pick it up as an active device.
Hi there, try the following suggestions:
1. Check if the firmware you downloaded is correct. We noticed that there were different firmwares and we found this one is viable after testing:
https://drive.google.com/file/d/1MJQflK_MZtDPcmKNS1VGBIphpyHvRBFz/view 2. The new firmware seems not supporting wifi mining very well, you can try the old-school way, using an ethernet cord instead.
3. Check if your network is fine.
4. Access the IP address with your Internet browser, sometimes it shows inactive, but it's accessible.
5. Use a new TF card to burn the firmware, do not use the original one, because after burning, its capacity changes, if you didn't restore its capacity, things might go wrong.