Well, so far the best I can get out of a set of 10 is about 3.5Mh/s (850MHz)...a far cry from the 5Mh/s or so in the "secret picture" Jack has in the original post. I hope this is going to be something we can expect with a future firmware update to the controller. I tried turning the little voltage dial up on the power supplies, but it didn't appear to have any noticeable effect.

Had to cut and strip the power cables for the PSUs but it was the green/ground white/neg black/pos wiring someone else posted here, so that was easy. All of my miner cables were correctly colored. Unfortunately, the power cable for one of the USB hubs was bad out of the box...but I had another cable in my giant box of spares that works.

Setting these up is a cable management nightmare, but I've got it to where I'm happy with it. Now I'm just going to leave them overnight to do their thing and see how it goes. I had one of the controllers reset randomly on its own once, that I noticed - hopefully that isn't a frequent occurrence.

So far, I like these little guys...they look unique and the gadget factor is there. I just wish I could get the 500Kh/s performance seen in that photo...I wish Jack would tell us what was done to achieve that!