Hi friends i have only 2 pci x16 graphic card slots can i run 3 cards with my this board due to any connector or any other device???
I think you can connect them with riser cables but wait for Nawazish for a more appropriate answer.
Yes this is the right answer Evillish.
Hwaleed you will need three riser cables 1x to 16 x.
NOTE: If you are planning to buy some cards then plz wait for sometime. Currently situation is gonna change alot due to Scrypt ASICS(I would call it greed
). Let me test another algo that is Scrypt-N. Will update you guys within 48 hours. Ah Scrypt-N. I found out about Vertcoin when it was released but I couldn't get it set up for my graphics cards, might try setting it up again as it is very profitable.
http://www.verters.com/vertcoin-mining-calculator
Note: You will get half of your hash rate at most, for example if you get 1200 kh/s, you will get about 550-600 kh/s on this.
Well here is the update on Scrypt-N. My daily payout for two days was around 0.011-0.010 compared to .019-0.018 on Scrypt coins. This is mostly due to the hashrate gets cut in to half as compared to Scrypt so the profitability is very bad. The profits will only get higher when there will be more Scrypt-N coins to mine. For the time being I am sticking to Scrypt.